The turnover is the job you will repeat more than any other. Every checkout starts a short window in which the unit has to go from lived-in to guest-ready, with nothing missed and no time lost. Most bad reviews, most surprise costs and most landlord complaints trace back to a turnover that was rushed, skipped a step or depended on one person's memory.
On an arbitrage unit the stakes are higher than on a property you own. You are protecting your reviews and the landlord's asset at the same time. This guide gives you a room-by-room checklist, a way to time the window, a setup for your cleaner, a restocking system and a simple flow for reporting damage. Use it to write your own turnover standard this week.
Why turnovers matter more when you do not own the unit
A homeowner who hosts can absorb a scuffed wall or a slow drain. You cannot. Your lease likely requires you to return the unit in good condition, and your landlord agreed to short-term or mid-term use partly because you promised it would be cleaned and inspected after every stay. The turnover is where you keep that promise.
A good turnover does three jobs at once:
- Guest readiness. Clean, stocked and working, so the next stay starts well.
- Inspection. Every turnover is a free walk-through. Leaks, damage and wear get caught while they are small.
- Evidence. Timestamped photos after each turn are your record if a guest disputes a damage claim or the landlord asks about condition.
If your turnover only covers the first job, you are paying for a cleaning and getting none of the protection.
The checklist, room by room
Write the checklist once, in order, and have it followed the same way every time. Order matters: top to bottom, dry before wet, and the inspection items before anything gets wiped away.
On arrival
- Photograph every room before touching anything. This is the condition the guest left.
- Check for damage, missing items, signs of smoking, pets or more guests than booked.
- Strip all beds and start the first laundry load, or bag linens for an outside service.
Bedrooms
- Check mattress protectors and pillows for stains; swap if needed.
- Make beds to a standard photo so every bed looks the same.
- Check under beds, in drawers and closets for left items and trash.
- Dust surfaces, lamps and headboards; test bedside lamps and outlets.
Bathrooms
- Clean toilet, shower, tub, sink and mirror; clear drains of hair.
- Look for slow drains, running toilets, loose fixtures and caulk gaps. These are your early leak warnings.
- Restock toilet paper, soap, shampoo and towels to the set count.
Kitchen
- Empty and wipe the fridge, microwave and oven; run and empty the dishwasher.
- Check dishes and cookware against the inventory count.
- Restock coffee, dish soap, sponges, trash bags and paper towels.
Living areas and exterior
- Vacuum and mop all floors, including under cushions.
- Test the TV, Wi-Fi, thermostat and smart lock battery level.
- Take out all trash and recycling; check the entry, patio and parking spot.
Before leaving
- Set the thermostat to the standard setting and close blinds to the set position.
- Photograph every room again, matching the listing photos.
- Submit the report: done, issues found, items used, anything needing a repair.
Timing the window and the cost of short stays
Most short-term listings have a gap of a few hours between checkout and check-in. Same-day turnovers are normal, so the checklist has to fit the window with room to spare. Time a full turnover yourself before you hire anyone, then add a buffer for the day something goes wrong.
A practical rule: if a full turn takes longer than about two-thirds of your window, either move checkout earlier, check-in later, or block a night between certain stays, such as after a large group.
Stay length drives turnover cost more than anything else. Here is a worked example. Every number is an assumption for illustration: a unit books 24 nights a month and a turnover costs $80 including laundry.
| Average stay | Turnovers per month | Monthly turnover cost |
|---|---|---|
| 2 nights | 12 | $960 |
| 3 nights | 8 | $640 |
| 6 nights | 4 | $320 |
Same occupancy, three times the cleaning bill. Whether a two-night minimum is worth it depends on whether the extra bookings and rate cover the extra turns. Model it before you change your settings; our guide to break-even occupancy shows how to treat cleaning as a per-stay cost rather than a flat monthly one.
Setting up your cleaner
Whether you hire an independent cleaner or a company, the goal is the same: someone who follows your checklist, not their own habits.
- Pay per turnover, priced by unit size. Agree the rate in writing, including what laundry, restocking and deep cleans cost on top.
- Run a paid test turnover. Walk the unit afterward with the checklist. You learn more from one test than from any interview.
- Require photo reports. Before and after photos for every room, sent the same day, ideally through a shared app or folder tied to the reservation.
- Give them a reporting path. Tell them exactly who to message for damage, a missing item or a repair, and how fast you will respond.
- Line up a backup. Your main cleaner will get sick or double-booked. Have a second person trained on the same unit before you need them.
- Schedule deep cleans. Set a recurring deep clean, say every quarter, for oven, baseboards, vents and behind appliances, separate from regular turns.
Automate the schedule early. Most turnover tools can create a cleaning task from each checkout so nobody relies on a text thread. This is one of the systems worth standardizing before you add units, as covered in from one unit to ten.
On a new unit, have your cleaner run a full timed turnover after a test stay, before your first real guest arrives. Our first-unit launch checklist explains how to set up that test stay and what it usually uncovers.
Restocking with par levels
Running out of towels on a same-day turn is a process failure, not bad luck. Fix it with par levels: a set quantity of each item kept on site, with a reorder point.
- Linens: many operators keep three sets per bed, one on the bed, one in the wash and one spare. Same for towels per guest.
- Consumables: set a count for toilet paper, soap, coffee and trash bags, and a reorder point, such as when the closet drops below half.
- A locked owner's closet: spares, cleaning supplies and tools that guests cannot reach.
- An inventory sheet: dishes, cookware, remotes, hangers and small appliances, checked on each turn so missing items are caught against the right stay.
Have the cleaner record what they used on each report. Over a month that tells you your real supply cost per stay, which is a better number to underwrite with than a guess.
Damage, maintenance and your landlord
When a turnover finds a problem, follow the same flow every time:
- Document. Photos and a short note, tied to the reservation dates.
- Contain. Shut off water, block the calendar or remove a broken item so the next guest is not affected.
- Claim promptly. Platforms set their own deadlines and evidence rules for damage claims. Check the current terms on each platform you use and file inside the window.
- Repair or report. Fix what your lease makes your responsibility. Tell the landlord about anything structural, any water issue and anything the lease says they must hear about, within the time your lease sets.
Landlords rarely object to a problem reported quickly with photos. They object to finding it months later. A short monthly condition summary built from turnover reports is an easy way to show the unit is being looked after.
If you run mid-term stays, the checklist still applies, but turnovers are fewer and deeper. Add a mid-stay check-in, scheduled with notice and as the guest's agreement allows, and a fuller inspection at move-out, since a month of wear shows up all at once.
This week, time one full turnover yourself, write the checklist in the order you did it, set par levels for linens and consumables, and send your cleaner a photo-report template. Then plug your real per-stay cleaning cost into the rental arbitrage calculator and check whether your minimum stay still makes sense.
Looking for landlord-approved inventory? Browse the public deal board, compare plans, or have our team source a property for you.